PRODUCT SPECIFICATION:
Swallowing may lead to serious injury in as little as 2 hours, due to chemical burns and potential
perforation of the oesophagus.
If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons
Information Centre on 13 11 26 (in Australia) for fast, expert advice.
Examine devices and make sure the battery compartment is correctly secured. Do not use if compartment
is not secure.
Dispose of used button batteries immediately and safely.
The RCM marking of this product applies to AS/NZS CISPR15 (EMC) “Limits and methods of measurement
of radio disturbance characteristics of electrical lighting and similar equipment”. This product is designed
to conform to AS/NZS60598 “Luminaires, general requirements and tests”.
Installation:
Kit includes:
a.
5m (HYUSTR001N) LED Strip
b.
24V DC Power Adaptor
c.
1.5m adaptor lead with the plug
d.
Double sided 3M tape for easy installation
e.
Remote control with battery
1.
Before the installation, please ensure the power is off
2.
Ensure that surface is clean and dry prior to applying LED Strip
3.
Do not cut the strip as it will impar the IP rating
4.
Peel backing off the double sided tape and apply to the surface. Carefully consider placement of the
product due strong adhesive qualities
5.
Plug power adaptor into power point
6.
To control the Vibelite Neon LED Flex, you can use Smart Life app on your phone or tablet or
alternatively use the remote control
NOTES: Vibelite Neon LED Flex and control device should use the same WiFi connection
Parameter
HYUSTR001N
CCT
RGB
Colour Rendering Index
>80
Total Power
24W
IP Rating
IP65
Voltage Rating
24V DC
Dimmable
Yes
Rated Average Design Life
36,000Hrs
WiFi
2.4Ghz
Dimensions
10mm x 5,000mm
Remote control contains
a LITHIUM COIN type
battery.
WARNING
-
KEEP OUT
OF REACH OF CHILDREN
