Hyundai HYULF1030MULTI, Instruction Manual

Page: 41 / 64

GB
GB - 40
PREPARATION OF THE REMOTE CONTROL
The remote control requires on CR2025 type 3V lithium battery, to extend the battery life of the
original battery, a small plastic spacer tab has been inserted between the battery and the battery
terminal. In order to get your remote control working initially, pull the tab from the battery
compartment.
CELL DATA
Battery type:
1x CR2025, 3V (Service life: approximately 1 year for room normal use )
How To Replace The Battery.
Push the button towards right. Pull the battery loader out. Insert a new battery into the battery
loader, make sure the polarity matches. Insert the battery loader into the remote control.
Notes on batteries
If the remote control is not used for a long period of time, please remove the battery from
the compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.
Getting Started:
Step 1: Remove the protective film covering on the LCD.
Step 2: Fix the stand on player rear and make it stand.
Step 3: Plug in memory devices
Step 4: Plug in the power adaptor to power on the photo frame.
Connecting stand or put on wall
1. Put the stand on the stand hole and then fix it well , place it on a stable and flat surface
so that it stands up.
2. You can put the digital photo frame on wall, make sure you get a suitable screw or nail that
fit the rear wall mount hole on it.
Please ensure that the stubs or nails on the walls can support minimum 1kg weight. Ensure
that the hole to be drilled is slightly smaller than the diameter of the screw.
Make sure the screw was tightened into the wall with 11mm depth.
Fix stand Put on wall mount hole