EN - 0
TROUBLESHOOTING
TROUBLESHOOTING
If a fault occurs,first check the points listed below before taking the set for repair. Do not open
the set as there is a risk of electric shock. If you are unable to remedy a problem by following
these hints,consult your dealer or service center
wARNING:
Under no circumstances should you try to repair the set yourself,as this will invali-
date the warranty.
Problem
Solution
No sound/power
Volume not adjusted
Adjust the VOLUME
Power cord not securely connected
Connect the AC power cord properly
Batteries dead/incorrectly inserted
Connect the AC power cord properly
No disc indication
No CD/MP3 inserted
Insert a CD,MP3, CD-R
CD badly scratched or dirty
Replace/clean CD,see Maintenance
Laser lens steamed up
Wait until lens has adjusted to room temperature
CD-R is blank or the disc is not finalized.
Use a finalized CD-R.
Display does not function properly/No reaction to operation of any of the controls
Electrostatic discharge
Switch off and unplug the set.Reconnect
CD/MP3 playback does not work
CD/MP3 badly scratched/dirty
Replace/clean CD/MP3after a few seconds (see maintenance)
Program is active
Quit program mode(s)
The CD/MP3 skips tracks
CD/MP3 damage or dirty
Replace or clean CD/MP3
-
•
-
•
-
•
-
•
-
•
-
•
-
•
-
•
-
•
-
•
-
•
-
•
Summary of Contents for HYU TRC 600 AU3
Page 52: ...Seoul Korea ...
