manualshive.com logo in svg

Hyundai HYT150, Instruction Manual

Share
Download
Hyundai HYT150 Instruction Manual Download Page 4

Safety Information

Understand Your Machine

•

 

WARNING!

 You must read these instructions carefully before operating the machine. Make 

sure that you are familiar with the controls and properly operate the machine. You must learn how 
to stop the machine quickly. If you do not follow the warnings and instructions, it may result in fire 
and/or serious injury. Make sure to save all warnings and instructions for future reference.

• 

Read this manual and labels affixed to the machine to understand its limitations and potential 

hazards.

• 

Be thoroughly familiar with the controls and their proper operation. Know how to stop the

machine and disengage the controls quickly.

• 

If the unit is to be used by someone other than original purchaser, or is to be loaned, rented, or 

sold, always provide this manual and any needed safety training before operation. The user can 
prevent and is responsible for accidents or injuries that may occur to themselves, to other 
people, or to property.

• 

Do not force the machine beyond its limits. Use the correct machine for your application.

• 

Know how to stop the machine quickly in case of emergency. Understand the use of all 

controls.

• 

ALL MAINTENANCE other than that listed in this manual, should be carried out by 

professionally trained and certified personnel.

!

  4

www.hyundaipowerproducts.co.uk

01646 687 880

[email protected]

Summary of Contents for HYT150





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands