Page 11
Rev 4
4.2
Blade removal.
4.2.1
When the machine is supplied the blade is fitted. Follow the steps below to
remove it.
4.2.2
Line up the hole in the carrier plate (Fig 1: 3) with the notch beneath it
and lock the carrier plate with the size 4 Allen Key.
4.2.3
Remove the securing nut for the blade using the supplied spark plug wrench
(Fig. 2) Important: Left-handed thread!
4.2.4
Remove the pressure plate cover (Fig. 3: 5) and the pressure plate (Fig.3: 4).
4.2.5
The blade (Fig. 3: 3) can now be removed.
4.2.6
To assemble, proceed in reverse order. Please note that the side of the
pressure plate with recess must point towards the blade.
4.3
Spark plug
adjustment or
re
placement
.
4.3.1
Pull the spark plug cover
(1)
off, unscrew the
spark
plug using the plug
wrench
.
4.3.2 Adjust new spark plug as shown and refit.
4.3.2.1 Stop machine and wait for it to cool down.
4.3.2.2 Clean spark plug and adjust spark plug electrode (1) gap to between
0.6 mm to 0.8 mm.
4.4
Operation safety instructions.
4.4.1
Grass Trimmer & Brush Cutter Operation Instructions.
4.4.1.1
To turn the machine off, the switch has to be in “STOP” position.
4.4.1.2
When trimming and cutting make sure you follow any bylaws in
force in your area.
4.4.1.3
Do not mow at night.
4.4.1.4
Before starting work remove any hard objects such as stones,
metal parts etc. – have to be removed. They could be thrown and cause
personal or material damage.
4.4.1.5
Working in high shrubs or bushes, the minimum working height
must be above 150 mm so that you do not expose animals, such as
hedgehogs, to any risk.
4.3
a Air filter - clean or replace.
4.3.1 Stop machine and wait for it to cool down.
4.3.2 Undo cover screw (1) remove cover (2) and
remove sponge filter (3).
4.3.3 Wash sponge in soapy water rinse in fresh
water, Dry completely then reinsert.
4.3.4 If filter is beyond cleaning the replace with a
new one.
Summary of Contents for HYMT264-4
Page 1: ......
Page 17: ...Page 17 Rev 4...
