www.hyundaipowerproducts.co.uk
36
Maintenance & Care
General Maintenance
WARNING : Turn OFF the machine, allow all moving parts to come to a
complete stop, and disconnect the power cord before maintaining the machine.
You need to wear proper clothing and protective gloves whenever your hands are
at risk.
•
Keep all nuts, bolts and screws tight to be sure the machine is in a safe working
condition.
•
Replace worn or damaged parts for safety. Only use manufacturer-
recommended parts and accessories.
!
Storage
Keep the machine stored in a dry, level area away from damp, moisture and
rain fall. Allow the machine to cool down before storing.
•
Make sure the machine is clean and dry before storing.
•
Ensure the machine is stored in a position, where any persons cannot step on, to
attempt to reach items up high, due to risk of movement.
•
DO NOT store the machine near an ignition source, such as a wood stove, gas
or electric heater, or an appliance or heater with a pilot light.
•
Store the machine out of reach of children or anyone who is not familiar with
operation.
•
DO NOT stack other items on top of the machine when in storage.
•
Make sure the machine is stored away from direct sunlight. Store indoors or in a
safe, frost-free area during severe weather and winter months.
!
Summary of Contents for HYMS1500E
