Hyundai HYM42P-B, Instruction Manual

Page: 19 / 41

OPC Cable Adjustment
19
STEP 6
Check the cable lies flat and has not snagged
on any other part of the lawnmower.
OPC Cable Adjustment
NOTE - It is necessary as part of routine
maintenance to adjust the OPC cable tension
to ensure the lawnmower will start correctly.
If there is more than 10mm movement in the
OPC lever before the cable begins to move,
then the OPC cable will require adjustment.
STEP 1
Follow the OPC cable to the adjuster located
on the side of the engine.
Lock Nut
Adjustment Nut
STEP 2
Undo the lock nut and wind it forwards.
STEP 3
Move the adjustment nut towards the lock nut
and continually check the cable tension at the
lever.
STEP 4
Once the movement has been removed, hold
the adjustment nut in place and tighten the
lock nut back towards the adjustment lever to
lock the cable in place. Check the cable
adjustment has worked by starting the mower.
If the mower still fails to start, re-adjust until
the lawnmower starts.Also check that when
the OPC lever is released, that the blade stops
promptly.