Hyundai HYB33, User Manual

Page: 8 / 16

3. ASSEMBLY AND INITIAL OPERATION
3.1 Connecting controls and attachment hose.
3.1.1 Connect flexible hose to the main unit by using the 2 pipe clips (9).
3.1.2 Put one pipe clip (9) over flexible hose (7) then push one end over main unit
outlet.
3.1.3 Put the other pipe clip (9) over the other end then push it over the blower pipe
A (2).
3.1.4 Then push the blower pipe B (3) over the spare end of blower pipe A (2),
locate the keyway and then lock in an clockwise direction. Continue to do the same
with blower pipes C and D as required. See picture 1 below.
2. Blower pipe A 3. Blower pipe B 4. Blower pipe C 5. Blower pipe D
6. Throttle controls 7. Flexible hose 9. Pipe clips
3.2 Adjusting the control handle.
3.2.1 Put unit on your back.
3.2.2 Using supplied a llen key undo screw (1), slide control handle (2) along the
pleated section until it is in the desired position.
3.2.3 Once in the desired position (example (3)) us I ng the supplied a llen key re-
tighten the screw.
Page 8 Ver 2