extension cord. When using extension lines
or mobile distribution networks the total
2
length of lines for a cross section of 1.5 mm
should not exceed 60 m; for a cross section of
2
2.5 mm this should not exceed 100 m.
NEVER connect to other power sources.
Do not use in rainy or wet conditions.
Do not touch bare wires or receptacles
(outlets).
Protect children by keeping them at a safe
distance from the generating set. Do not
allow children or non-qualied persons to
operate.
Electrical equipment (including lines and
plug connections) should not be defective.
The generating set must not be connected to
other power sources, such as the power
company supply mains.
Protection against electrical shock depends
on circuit breakers specially matched to the
generating set. If the circuit breakers require
replacement they must be replaced with a
circuit breaker having identical ratings and
performance characteristics.
Due to high mechanical stresses only tough
rubber-sheathed exible cable or the
equivalent should be used.
The user that he shall conform to regulations of
electrical safety applicable to the place where
the generating sets are used.
The generator ground terminal is connected to
the frame of the generator, the metal non-
current carrying parts of the generator, and
ground terminal of each receptacle. Before
using the ground terminal, consult a qualied
electrician or electrical inspector for local
applicable regulations.
Connections for standby power to a building
electrical system must be made by a qualied
electrician. The connection must isolate the
generator power from utility power, and must
comply with all applicable laws and electrical
codes. A transfer switch, which isolates the
generator power from utility power is available
through qualied equipment following local
laws and regulations.
This generator produces heat when running!
