![background image](http://html1.mh-extra.com/html/hyundai/hy2192/hy2192_instruction-manual_2197048023.webp)
www.hyundaipowerproducts.co.uk
23
www.hyundaipowerproducts.co.uk
Operation
How to cut selected branches
1. Sawing of small branches Set your saw cut of
smaller branches (0 0-8 cm) from top to
bottom, as illustrated. Be aware of easily
breaking of the branch if you have
underestimated the size and weight. Be
completely aware of the falling cut material.
2. Sawing off in parts. For large/long branches,
sawing off in parts is recommended. This is
the only way to safely ensure the point of
impact of the cut material. Clear away from
the area in which you are standing any parts
that have already been cut and are lying on
the ground.
3. Sawing of larger branches. For controlled
sawing of larger branches (08-2Ocm), first
select a relief cut (see cutting a). This is made
from below. Saw a notch in the lower third of
the branch. The actual length cut (see cutting
b) is again made from the top, as far as
possible in line with the first cut so that the
two cuts meet.