![background image](http://html1.mh-extra.com/html/hyundai/hy2189/hy2189_instruction-manual_2195647017.webp)
www.hyundaipowerproducts.co.uk
17
Operation
Battery Charger Operation
!
Ensure the power source switch is OFF when plugging in Battery Charger
1. Slide the
Battery (D)
into the
Battery Charger (G)
, by lining up the
terminals on both. It will be secured with an affirmative *click!*.
NOTE
– To remove the battery, press the
Battery Release Button(F)
whilst
pulling away from the
Battery Charger (G)
.
2. Plug the
Battery Charger (D),
then turn on the power source.
3. The Charge State Lights will indicate the following:
!
You MUST understand the whole Instruction Manual before any operation
Charge State
Lights
Solid Green & F
lashing Red:
Charging
Solid Green & Solid Red:
Fully charged
Flashing Green:
Thermal protection activated, this is
when the battery is either too hot or too cold to be
charged. The charger will commence charging when
the battery has reached the correct temperature.
Flashing Red:
Defective battery
or charger