17
CAUTION
Always remove the battery before carrying out any maintenance.
Do not disassemble the drill or charger unless you are qualified to do so.
If something unusual occurs during use, switch off the drill and remove the battery.
Inspect and repair the tool before using it again.
Repair of the tool must only be carried out by a qualified repair technician.
4.0
Inspect the drill and charger for any signs of heavy wear or damage.
4.1
Damaged parts must be repaired or replaced before using the drill.
4.2
Keep the ventilation slots clear of dust and dirt.
4.3
Keep the drill clean and wipe over with a cloth on a regular basis.
4.4
Do not clean the drill with any solvent based cleaning products as this could damage
plastic parts.
5.0
Store the drill, accessories and instruction manual in the original packaging.
5.1
Avoid areas of direct sunlight or varying temperature.
5.2
Do not stack other items on top of the drill.
5.3
Always store in a dry environment.
Model
HY2175
Power
18v
Chuck
10mm Keyless
Battery
JH001-18v
18v
Li-Ion 1500 mAh
Speed
0-350 / 0-1300rpm
Torque Settings
20+1
Charging Time
3-5 hours
Maximum Drilling Capacity
Steel Ø 10mm
Wood Ø 25mm
Sound Pressure Level
69.88 dB(A)
Sound Power Level
80.88 dB(A)
Drill Mode Vibration Level
a
h
= 0,685 m/s² K= 1,5 m/s²
Screwdriver Mode Vibration Level
a
h
= 1,030 m/s
2
K= 1,5 m/s²
Battery Charger
Rated Input Voltage
220-240v 50/60Hz
Rated Input Power
0.3A
Rated Output Voltage
21.5v
Rated Output Current
0.4A
4. MAINTENANCE
5. STORAGE & TRANSPORT
6. SPECIFICATION
