Page 8
7.
QUICK REFERENCE GUIDE
7.1.
Fitting the accessories
Make sure that the trigger is not in the ON position before changing any
accessories.
When using sanding pads do not apply excessive pressure this will wear the pad
and base plate.
7.1.1.
Make sure that the trigger is not in the ON position and remove the battery before
continuing.
7.1.2.
Remove the retaining bolt and washer locate the accessory on to the mounting pins.
7.1.3.
Fit the retaining bolt and washer and tighten with an allen key.
7.1.4.
When using the delta sanding accessory fix the sanding pad on to the base plate. (Hook and
loop system).
Summary of Contents for HY2150
Page 1: ...12V MULTI TOOL Model HY2151 User Manual ...
Page 12: ...Page 12 ...
