1-25
Model
Type
Boom
Arm
Counterweight
Shoe
Wheel
Dozer
Outrigger
HX400
NLT3
MONO
BOOM
Length [mm] Length [mm] weight [kg]
width [mm]
width [mm] Front Rear Front Rear
6500
2800
7000
600
-
-
-
-
-
A
B
·
: Rating over-front
: Rating over-side or 360 degree
·
Note 1.
2.
3.
4.
Lifting capacity are based on ISO 10567.
Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm,
level ground or 87% of full hydraulic capacity.
The Lift-point is bucket pivot mounting pin on the arm (without bucket mass).
*
Indicates load limited by hydraulic capacity.
Lift-point
height (A)
Lift-point radius (B)
At max. reach
3.0 m (9.8 ft)
4.5 m (14.8 ft)
6.0 m (19.7 ft)
7.5 m (24.6 ft)
9.0 m (29.5 ft)
Capacity
Reach
m (ft)
9.0 m
kg
*9920
*9920
*10030
9630
6.18
(29.5 ft)
lb
*21870
*21870
*22110
21230
(20.3)
7.5 m
kg
*9520
6960
*9240
6880
7.54
(24.6 ft)
lb
*20990
15340
*20370
15170
(24.8)
6.0 m
kg
*10320
9910
*9520
6900
*8880
5620
8.42
(19.7 ft)
lb
*22750
21850
*20990
15210
*19580
12390
(27.6)
4.5 m
kg
*15300
14350
*11830
9350
*10190
6650
*8860
4940
8.96
(14.8 ft)
lb
*33730
31640
*26080
20610
*22470
14660
*19530
10890
(29.4)
3.0 m
kg
*13580
8720
*11070
6330
9040
4780
8710
4600
9.22
(9.8 ft)
lb
*29940
19220
*24410
13960
19930
10540
19200
10140
(30.2)
1.5 m
kg
*14980
8230
11720
6050
8900
4660
8580
4490
9.22
(4.9 ft)
lb
*33030
18140
25840
13340
19620
10270
18920
9900
(30.3)
0.0 m
kg
*15760
11940
*15630
7960
11520
5870
8860
4610
8.98
(0.0 ft)
lb
*34740
26320
*34460
17550
25400
12940
19530
10160
(29.4)
-1.5 m
kg
*10800
*10800
*20480
11980
*15440
7890
11460
5830
9670
5010
8.45
(-4.9 ft)
lb
*23810
*23810
*45150
26410
*34040
17390
25260
12850
21320
11050
(27.7)
-3.0 m
kg
*21330
*21330
*18540
12190
*14200
8010
*10690
5980
*10420
5890
7.60
(-9.8 ft)
lb
*47020
*47020
*40870
26870
*31310
17660
*23570
13180
*22970
12990
(24.9)
-4.5 m
kg
*14890
12650
*10950
8400
*10090
7950
6.27
(-14.8 ft)
lb
*32830
27890
*24140
18520
*22240
17530
(20.6)
※
Lifting capacities are based upon a standard machine conditions.
Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools, ground conditions and attachments.
Lifting capacities will vary with different work tools, ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
The difference between the weight of a work tool attachment must be subtracted.
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
and attachments.
and attachments.
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
adjustments to the rated load as necessory for non-standard configurations.
adjustments to the rated load as necessory for non-standard configurations.