1-26
Lift-point
height (A)
Lift-point radius (B)
At max. reach
3.0 m (9.8 ft)
4.5 m (14.8 ft)
6.0 m (19.7 ft)
7.5 m (24.6 ft)
Capacity
Reach
m (ft)
7.5 m
kg
*7280
*7280
5.50
(24.6 ft) lb
*16050
*16050
(18.1)
6.0 m
kg
*7430
*7430
*7000
*7000
*7110
5930
6.74
(19.7 ft) lb
*16380
*16380
*15430
*15430
*15670
13070
(22.1)
4.5 m
kg
*9220
*9220
*7630
6980
*7160
4950
7.47
(14.8 ft) lb
*20330
*20330
*16820
15390
*15790
10910
(24.5)
3.0 m
kg
*8680
6660
*7450
4820
7180
4490
7.85
(9.8 ft)
lb
*19140
14680
*16420
10630
15830
9900
(25.8)
1.5 m
kg
*9680
6380
7570
4700
6980
4340
7.93
(4.9 ft)
lb
*21340
14070
16690
10360
15390
9570
(26.0)
0.0 m
kg
*14080
9260
*10260
6210
7490
4620
7200
4460
7.72
(0.0 ft)
lb
*31040
20410
*22620
13690
16510
10190
15870
9830
(25.3)
-1.5 m kg
*13700
9280
*10220
6190
7990
4910
7.18
(-4.9 ft) lb
*30200
20460
*22530
13650
17610
10820
(23.6)
-3.0 m kg
*16760
*16760
*12390
9450
*9090
6330
*8530
6040
6.24
(-9.8 ft) lb
*36950
*36950
*27320
20830
*20040
13960
*18810
13320
(20.5)
Note 1.
2.
3.
4.
Lifting capacity are based on ISO 10567.
Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm
level ground or 87% of full hydraulic capacity.
The Lift-point is bucket pivot mounting pin on the arm (without bucket mass).
*
Indicates load limited by hydraulic capacity.
※
Lifting capacities are based upon a standard machine conditions.
Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools ground conditions and attachments.
Lifting capacities will vary with different work tools ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
The difference between the weight of a work tool attachment must be subtracted.
Consult your Hyundai dealer regarding the lifting capacities for specific work tools and
Consult your Hyundai dealer regarding the lifting capacities for specific work tools and
attachments.
attachments.
Failure to comply to the rated load can cause possible personal injury or property damage.
Failure to comply to the rated load can cause possible personal injury or property damage.
Make adjustments to the rated load as necessory for non-standard configurations.
Make adjustments to the rated load as necessory for non-standard configurations.
·
: Rating over-front
: Rating over-side or 360 degree
·
Model
Type
Boom
Arm
Counterweight
Shoe
Wheel
Dozer
Outrigger
HX260A NL
MONO
BOOM
Length [mm] Length [mm] weight [kg]
width [mm]
width [mm] Front Rear Front Rear
5850
2100
6100
600
-
-
-
-
-
A
B
