Hyundai HX220 NL Service Manual Download | Manualshive

Page: 16 / 41

background image

KEEP RIDERS OFF EXCAVATOR

Only allow the operator on the excavator. Keep
riders off.

Riders  on  excavator  are  subject  to  injury  such
as  being  struck  by  foreign  objects  and  being
thrown off the excavator.   Riders also obstruct
the  operator's  view  resulting  in  the  excavator
being operated in an unsafe manner.

MOVE AND OPERATE MACHINE SAFELY

Bystanders can be run over. Know the location
of bystanders before moving, swinging, or
operating the machine.

Always keep the travel alarm in working
condition. It warns people when the excavator
starts to move.

Use a signal person when moving, swinging, or
operating the machine in congested areas.
Coordinate hand signals before starting the
excavator.

OPERATE ONLY FORM OPERATOR'S SEAT

Avoid possible injury machine damage. Do not
star t engine by shor ting across star ter
terminals.

NEVER start engine while standing on ground.
Start engine only from operator's seat.

PARK MACHINE SAFELY

Before working on the machine:

Â

Park machine on a level surface.

Â

Lower bucket to the ground.

Â

Turn auto idle switch off.

Â

Run engine at 1/2 speed without load for 2 minutes.

Â

Turn key switch to OFF to stop engine. Remove key

from switch.

Â

Move pilot control shutoff lever to locked position.

Â

Allow engine to cool.

1-3

13031GE08

13031GE09

13031GE26

«
...
14
15
16
17
18
...
»

Summary of Contents for HX220 NL










































Reviews:

No comments

Related manuals for HX220 NL

Brand: Harmar Mobility Pages: 28

Brand: Fantek Pages: 40

Brand: Case Pages: 22

Brand: Meec tools Pages: 38

Brand: Meec tools Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands