1-24
Model
Type
Boom
Arm
Counterweight
Shoe
Wheel
Dozer
Outrigger
HX140
LDT3
MONO
BOOM
Length [mm] Length [mm] weight [kg]
width [mm]
width [mm] Front Rear Front Rear
4600
3000
1900
600
-
Down
-
-
-
A
B
余
: Rating over-front
: Rating over-side or 360 degree
余
Note 1.
2.
3.
4.
Lifting capacity are based on ISO 10567.
Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm,
level ground or 87% of full hydraulic capacity.
The Lift-point is bucket pivot mounting pin on the arm (without bucket mass).
*
Indicates load limited by hydraulic capacity.
Lift-point
height (A)
Lift-point radius (B)
At max. reach
1.5 m (4.9 ft)
3.0 m (9.8 ft)
4.5 m (14.8 ft)
6.0 m (19.7 ft)
7.5 m (24.6 ft)
Capacity
Reach
m (ft)
7.5 m
kg
*2420
*2420
4.49
(24.6 ft)
lb
*5340
*5340
(14.7)
6.0 m
kg
*2100
*2100
*2020
*2020
6.03
(19.7 ft)
lb
*4630
*4630
*4450
*4450
(19.8)
4.5 m
kg
*3260
2840
*1890
*1890
6.91
(14.8 ft)
lb
*7190
6260
*4170
*4170
(22.7)
3.0 m
kg
*4060
*4060
*3640
2760
*1880
*1880
7.39
(9.8 ft)
lb
*8950
*8950
*8020
6080
*4140
*4140
(24.2)
1.5 m
kg
*8230
7470
*5270
4030
*4180
2640
*2120
1870
*1970
1860
7.53
(4.9 ft)
lb
*18140
16470
*11620
8880
*9220
5820
*4670
4120
*4340
4100
(24.7)
0.0 m
kg
*7170
6990
*6240
3800
*4660
2530
*2170
1880
7.37
(0.0 ft)
lb
*15810
15410
*13760
8380
*10270
5580
*4780
4140
(24.2)
-1.5 m
kg
*4240
*4240
*9110
6860
*6630
3700
*4850
2470
*2580
2060
6.88
(-4.9 ft)
lb
*9350
*9350
*20080
15120
*14620
8160
*10690
5450
*5690
4540
(22.6)
-3.0 m
kg
*7360
*7360
*9450
6920
*6290
3700
*3480
2520
5.97
(-9.8 ft)
lb
*16230
*16230
*20830
15260
*13870
8160
*7670
5560
(19.6)
-4.5 m
kg
*7110
*7110
*4500
4000
4.40
(-14.8 ft)
lb
*15670
*15670
*9920
8820
(14.4)
侍
Lifting capacities are based upon a standard machine conditions.
Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools, ground conditions and attachments.
Lifting capacities will vary with different work tools, ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
The difference between the weight of a work tool attachment must be subtracted.
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
and attachments.
and attachments.
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
adjustments to the rated load as necessory for non-standard configurations.
adjustments to the rated load as necessory for non-standard configurations.
