17
4.2 PRIMING WATER
Make sure to prime the pump with water prior to operating it. Priming creates a
vacuum that helps to start the flow of water.
1.
Unscrew the primer cap and insert the neck of the water container into the
opening. Gradually fill until the reservoir is full.
2.
Tighten the cap back on.
3.
In case of dry operation (running the pump without priming), stop the
engine immediately and allow it to cool before following the priming
procedure.
WARNING!
DO NOT OPERATE WITHOUT PRIMING. DOING SO WILL
OVERHEAT THE ENGINE AND RESULT IN DAMAGE TO THE
SYSTEM. ENSURE THAT THE PRIMING WATER DOES NOT
CONTAIN DEBRIS.
