Hyundai HVC 101, Instruction Manual

Page: 27 / 44

– It is not permissible to adjust the surface of the extra attachment (e.g. self – adhesive
paper, foils , etc.)!
– Use this appliance only for the purpose for which it was designed as specified in this
user‘s manual. Never use the appliance for any other purpose.
– All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
– WARNING : There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The manufacturer is not responsible for damage caused by improper use of the
appliance and the accessories and its guarantee for the appliance does not apply in
situations when the safety warnings above are not complied with. Failure to replace or
maintain all filters regularly according to the instructions in Chapter III. and also using
non-original filters, the properties of which resulted in failure or damage of the vacuum
cleaner, is also understood to be improper use of the appliance.
II. EQUIPMENT AND ACCESSORIES OF VACUUM CLEANER (Fig. 1).
A – vacuum cleaner
A1 – ON–OFF button A4 – holder
A2 – light signaling A5 – power supply socket
A3 – container lock button
B – dust container
B1 – filter B2 – filter protector
C – holder
D – brush adapter
E – slot adapter
F – rubber scraper
G – charged
III. PREPARATION AND USE OF THE VACUUM CLEANER
Remove all the packing material, take out the vacuum cleaner and the accessories.
Fastening of the holder to the wall
Fasten the holder C close enough to the electric socket using bonding material (Fig.3).
Make sure that there is no electric, telephone, plumbing fittings under the plaster at the
place of mounting the holder. You can also place the holder on a horizontal surface, such
as a table, etc. Holder must be placed or fixed in flat position otherwise vacuum cleaner
can fall down and caused injury. Then slide the vacuum cleaner
A
to the holder together
with the accessories ( D , E , F ).
Charging the battery
It is necessary to charge the accumulator at least 6 to 7 hours before first use. Plug the
adaptor G into the el. mains. Slide the connector of the adaptor lightly into the socket A5 in
the cleaner (placed in holder
C
). The operation of charging of the accumulator is indicated
by the indicator A2 (pic. 6). The accumulator is usually fully charged after approx. 5 hrs
and gives operation time for. 13 minutes. Turn the cleaner off before charging! Maximum
charging time is 5 hours, do not exceed this time!
GB
GB - 27