![background image](http://html1.mh-extra.com/html/hyundai/htx-646/htx-646_user-manual_2196527041.webp)
EN
EN - 41
5. PREFERENCE PAGE:
5.1 TV System:
This unit is suitable for all kinds of TV systems. You can select one of the PAL, MULTI or
NTSC.
PAL:
set the output at PAL system.
MULTI:
the TV system is auto switched according to the disc system.
NTSC:
set the output at NTSC system.
5.2 PBC:
There are 2 optional output modes: ON/OFF. If the PBC is set on, when playing
VCD2.0, return to the main menu, If the PBC is set off, when playing VCD2.0, return to the
main sequence.
5.3 AUDIO, SUBTITLE and DISC MENU LANGUAGE PAGE:
These are the initial settings by your preference. If a setting is supported by disc content, it
will work. Otherwise the disc default value works. These settings can be changed respectively
by pressing key [AUDIO] and [SUBTITLE] when playing.
5.4 PARENTAL:
The control level is for parents to control the content and protect children from violence and
egotism. The level of the disc is higher than the setting level and can not be played.
5.5 DEFAULT:
Resume to the factory default settings
6. PASSWORD PAGE
It can be set On/OFF.
Change the password. The initial factory password is 136900. You can set your own
password. If you forget your own password, you can use 136900 as general password.
Remote Control Operation
•
Insert the batteries into the cell box. Point the remote control the at remote sensor within
8 meters and within 30 degrees at its left or right side.
•
Take the battery out of the control if it is not used for a long time.
Battery Installation
● Remove the battery cover.
● Insert two batteries(AAA)making sure the polarity matches the marks inside the unit.
● Replace the cover.
Note:
Not mix old and new batteries.
Weak batteries can leak and severely damage the remote control.
Handing and Caring for Discs
Summary of Contents for HTX 646
Page 67: ...Pozn mky Notatky Notes...
Page 68: ...Seoul Korea...