5. MAINTENANCE AND STORAGE
a. Maintenance
After each use, remove the accumulator from its compartment and check for damage.
Correct maintenance is essential to maintain the original efficiency and safety of the machine
over time.
Keep all nuts, bolts and screws tight to be sure the equipment is in a safe working condition.
Never use the machine with worn or damaged parts. Damaged parts are to be replaced and
never repaired.
Only use original spare parts. Parts that are not of the same quality van be seriously damage
the equipment and compromise safety.
During maintenance, remove the battery from the tool.
To avoid overheating and damage to the motor, always keep the cooling air vents clean and
free of sawdust and debris.
Clean the housing only with a damp cloth. Do not use solvents! Then wipe thoroughly.
Check the condition of the tool. If the tool is damaged or has malfunction, do not use it and
bring it to a qualified service for inspection or reparation.
To maintain the optimum battery power, we recommend that the battery be discharged and
recharged every two months.
b. Storage
Remove the battery from the tool.
Put the blade protection on the blade of the tool during transport and storage.
Store the tool in a dry place and protected from freezing, the ambient temperature should not
exceed 50◦c. Put it out of the reach of children.
6. DISPOSAL
Electrical products should not be discarded with household products. According to the European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementation into
national law, electrical products used must be collected separately and disposed of at collection
points provided for this purpose. Talk with your local authorities or dealer for advice on recycling.
Summary of Contents for HSC20V
Page 7: ...3 ASSEMBLY...
Page 8: ......
