background image

13

This feature avoids direct air flow blowing on the 

body and makes you feel indulging in silky 

coolness. 

NTOE:

 This feature is available under cool,

Fan and Dry mode only.

FRESH function(     ) (some units) :

Breeze Away function(        ) (some units) :

Sleep function(     ) :

Follow me function(        ):

SET function

or

SET

SET

OK

Press the SET button to enter the function setting, then press SET button or TEMP    or TEMP

button to select the desired function. The selected symbol will flash on the display area, press the 

OK button to confirm.   

  

To cancel the selected function, just perform the same procedures as above. 

        

Press the SET 

button to scroll through operation functions as follows: 

Breeze Away  (     )     Fresh  (     )    Sleep(     )    Follow Me(    )    AP mode(    )  

[  ]: If your remote controller has Breeze Away button or Fresh button, you can not use the SET 

      button to select the Breeze Away or Fresh feature. 

*

*

*

The FOLLOW ME function enables the remote

control to measure the temperature at its

current location and send this signal to the

air conditioner every 3 minutes interval. 

When using AUTO, COOL or HEAT modes,

measuring ambient temperature from the

remote control(instead of from the indoor 

unit itself) will enable the air conditioner to

optimize the temperature around you and

ensure maximum comfort. 

The SLEEP function is used to decrease 

energy use while you sleep (and don t need 

the same temperature settings to stay 

comfortable). This function can only be 

activated via remote control.   

Note:

 The SLEEP function is not available

in FAN or DRY mode.  

,

For the detail, see   sleep operation   in 

  USER S MANUAL.  

,

,,

,,

,,

,,

   

 

,

,

,

,

,

,

,

,

  If the memory feature is stopped,   

OF

   

  displays for 3 seconds on the screen.

  While the memory feature is activated, 

  press the ON/OFF button, shift the mode

  or power failure will not cancel the Follow

  me function.

NOTE:

 Press and hold Turbo button for 

seven seconds to start/stop memory 

feature of Follow Me function. 

   If the memory feature is activated,  

On

   

   displays for 3 seconds on the screen.

AP function(        )(some units) :

   

 

   

 

Choose AP mode to do wireless network 

configuration. For some units, it doesn’t

work by pressing the SET button. To enter

the AP mode, continuously press the LED

button seven times in 10 seconds.   

impurities from the air.

and will help to

 

remove pollen and 

lamp (depending

 

on models) is energized 

Ionizer/Plasma Dust Collector and UV-C 

When the FRESH function is initiated, the

 

Summary of Contents for HRH-09UVMV





























Reviews: