normal use of its functions. Please update the synchronized software, if the software
version is updated.
3.2 Installation and use of sync software
Installation of application software
：
After download is done, it will enter installation mode automatically and remind you
whether the installation is done. If there is no direction for installation, you can find the
downloaded APP document in the smart cellphone to click installation. Installation
procedure will carry out software installation according to normal software installation.
Notes:
1.Some Android smart cellphones may remind that installation fails, please close
“unknown sources”in “security and privacy”of the cellphone settings, then it will be able
to be installed normally.
2.Ensure APP's background operation during the course of use.When you use
background cleanser or shut off the background application software, please do not shut
off this blue tooth notice service.If you shut off the blue tooth notice service, the
synchronized transmission function between the watch and cellphone will be influenced.
3.Ensure the cellphone blue tooth is open.
4.Open: cellphone settings-auxiliary functions-service, and choose “Turn on”.
3.3 Connection and synchronized functions of blue tooth
3.3.1 Connect the watch from cellphone
Enter cellphone settings-bluetooth settings-open blue tooth.Click on the search
equipment and click selection and pairing when the smart cellphone watch device is
found, then also choose “Yes”on the watch, the pairing is successful. (Note: it should be
confirmed whether the device can be searched).When there is “Directory” request,
please click on“OK” and had better choose “Don't Remind Next Time” at the same time
to facilitate the synchronization of directory when it is connected next time without
reminding you again.
