Hyundai HLCD-A32W4, Service Manual

Page: 16 / 83

32” LCD TV Hyundai HLCD-A32W4
16
4. Input/Output Description
4.1 D-SUB Connector
This procedure gives you instructions for installing and using the LCD TV display.
1. Position the display on the desired operation and plug the power cord into a convenient AC outlet.
Three-wire power cord must be shielded and is provided as a safety precaution as it connects the chassis
and cabinet to the electrical conduct ground. If the AC outlet in your location does not have provisions for
the grounded type plug, the installer should attach the proper adapter to ensure a safe ground potential.
2. Connect the 15-pin color display shielded signal cable to your signal system device and lock both screws
on the connector to ensure firm grounding. The connector information is as follow:
1
6
11 15
5
10
15 - Pin Color Display Signal Cable
Pin No. Description Pin No. Description
1 Red Video 9 No Ground
2 Green Video 10 Sync Ground
3 Blue Video 11 NC
4 NC 12 Serial Data for DDC
5 Ground 13 H-Sync.
6 Red Ground 14 V-Sync.
7 Green Ground 15 Serial Clock for DDC
8 Blue Ground
3. Apply power to the display by turning the power switch to the "ON" position and allow about ten seconds
for Panel warm-up. The Power-On indicator lights "GREEN" when the display is on.
4. With proper signals feed to the display, a pattern or data should appear on the screen, adjust the
brightness and contrast to the most pleasing display, or press auto-adjust to get the best picture-quality.
5. This TV (with PC function) has power saving function following the VESA DPMS. Be sure to connect the
signal cable to the PC.
6. If your TV requires service, it must be returned with the power cord.