Hyundai HLB 1510, Instruction Manual

Page: 36 / 48

Inserting The Battery In The Remote Control Hand -
set
▪ Remove the battery cover located on the back of
thehandset by gently pulling backwards from the in-
dicated part.
▪ Insert two AA/R03 or equivalent type batteries in
side. Place the batteries in the right directions.
▪ Replace the battery cover.
Note: Remove the battery from remote control hand -
set when it is not to be used for a long period. Otherwi -
se it can be damaged due to any leakage of battery.
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1. Connect the power supply cord to the system. Press
Power On/Off button.Then the TV switches itself to
stand-by mode (Optional).
2. To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the „-P/CH“
or „P/CH+“ button on the TV or press the „P-“ or „P+“
button on the remote control, so that last mode swit-
ched off is selected.
By either method the TV will switch on. When the TV
is operated for the first time, the following screen ap-
pears:
For more information on this process, see „Install
Menu“ section.
To switch the TV off:
▪ Press the „ (stand-by)“ button on the remote con-
trol or On/Off switch on the TV, so the TV will switch to
stand-by mode.
To power down the TV completely, press Power On/
Off button or unplug the power cord from the mains
socket.
Navigating the Menu System
1. Press to display the menu.
2. Press or button to select an icon.
Press for more options.
3. Use or button to highlight.
4. Press or buttons to change the settings.
Press OK to set as default.
5. To exit the menu or return from sub-menu screen,
press .
You can select the all option in the menu system. To
select options, use „Navigating The Menu System“.
ENG - 5