Getting started
To register
nd
Registering your handset with
additional b
EGISTERED
, follow the steps below
to register y
1.
your ha set to an additional base unit, see
et displays
UNR
ase
on page
31
. If your hands
our handset.
Press on the base unit for 4 seconds.
2. Press
MENU
on the handset.
3. Select
SYSTEM
. Press
OK
.
4. Select
REGISTER
. Press
OK
.
5. Use to select the base number you want.
Enter the sy
(Pre-set: 0000). Your handset starts searching for the base.
6.
stem PIN
ccessful, the
Registration shall be completed within 30 seconds. If registration is su
signal icon displays steadily. If registration failed, repeat the above procedure.
th
hecking the signal streng
NOTE:
Your base can register up to 4 handsets. After registering 4
registration memory is full. If you attempt
handsets, your base unit
to register an additional handset, registration will not be successful.
C
The signal icon displays the link status between your handset and the base unit. A s
icon means your handset and the base unit are linked. A flashing icon means your handset
and the base unit are not linked.
teady
If you move too far a
will hear
warning to
. Take your
handset cl
arning.
way from the base unit while you are on the phone, you
nes notifying you that your handset is almost out of range – lost link
oser to the base unit or your call may be cut off shortly after the w
Switch
ing your handset
on/off
1. Press
NOTE:
receive any call. You
If your handset has lost link, you will not be able to make or
will also not be able to carry out many of the
phone functions and features.
Switching on your handset
. The handset may take a few seconds to power up.
Switching
.
ld
off your handset
Press and ho
1
. The handset’s screen turns off.
- 13 -
Summary of Contents for HDT-H15
Page 1: ...Users Manual Bruksanvisning Hyundai HDT H15 English Svenska...
Page 7: ...Call the Helpline at 46 31 260021 Visit our online help www ondico se 7...
Page 18: ...Call 1 Press during a call to turn the speaker on Press again to turn it off 18...
Page 26: ...Call log 3 Press OK to confirm All records are deleted 26...