![background image](http://html.mh-extra.com/html/hyundai/hcombibp50/hcombibp50_instructions-manual_2197161011.webp)
loss of feeling, consult your physician before further exposing yourself to cold and vibration.
Always wear ear protection, loud noise for long time can make hearing debase even lost
hearing.
Total face and head protection must be wearing to prevent damage from plummet or branch.
Wear no-slip heavy duty work gloves to improve your grip on the brush cutter handle.
Gloves also reduce the transmission of machine vibration to your hands.
WARNING: The cutter area is still dangerous while the machine is coasting to a stop.
When transport, this unit must be handled carefully. Do not expose yourself or others to danger.
Envelop the blade before storage. Keep children away from it.
Never remove the machine’s guard.
Clean and maintain the tool before storage (see the chapters on this manual). Bring
maintenance after each use according the instructions of this manual. Improper maintenance
can reduce the lie of the tool, bring bad results and wear the tool and its accessories.
Check the tool before and after use. Check for loose fasteners, fuel leaks and damaged parts,
such as cracks in the cutting attachment. If the tool is damaged, if parts are missed or meet
some dysfunctions, do not use the tool and bring it to a service agent for inspection and
reparation.
Check the tool after dropping or other impacts to identify any significant defects; if any defects
are observed, stop to use the tool and bring it to a service agent for inspection and reparation.
Do not store in a closed area where fuel vapours can reach an open flame from hot water
heaters, furnaces, etc. Store in a locked, well-ventilated area only.
Never place the machine in any places where there are flammable materials (dry grass,
etc.), combustible gasses or combustible liquids.
When the machine is placed in storage for a long time, drain fuel from the fuel tank and
carburettor, clean the parts, move the machine to a safe place and confirm that the engine
is cooled down.
Warning –Be careful about exhaust gases; do not inhale them and do not expose people
to these gases.
National regulation can restrict the use of the machine.
Never modify the tool in any way.
Improper use of the machine can cause SERIOUS OR FATAL PERSONAL INJURY.
The engine exhaust form this product contains chemicals to cause cancer, birth defects,
of other reproductive harm.
Check regularly that the cutting attachment stops turning when the engine idles.
Kickback and Related Warnings
-
Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or
any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory which
in turn causes the uncontrolled power tool to be forced in the direction opposite of the
accessory’s rotation at the point of the binding.
-
For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the
wheel that is entering into the pinch point can dig into the surface of the material causing the
wheel to climb out or kick out. The wheel may either jump toward or away from the operator,
depending on direction of the wheel’s movement at the point of pinching. Abrasive wheels may
also break under these conditions.
-
Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions
and can be avoided by taking proper precautions as given below:
Summary of Contents for HCOMBIBP50
Page 1: ...HCOMBIBP50 READ THE INSTRUCTIONS BEFORE USE THE TOOL ...
Page 37: ......