![background image](http://html1.mh-extra.com/html/hyundai/h250/h250_owners-manual_2195340335.webp)
5-64
Driving your vehicle
The following procedures can be
used to confirm that the locking dif-
ferential is functioning properly:
(1) Position the vehicle so that one
wheel is on a dry paved surface
and the other on ice, snow, mud,
etc.
Drive the vehicle, and
observe the operation of the lock-
ing differential.
The vehicle
should not become stuck if the
differential is functioning properly.
(2) Depress the accelerator pedal
gradually, and then when traction
is good, depress it forcefully. If
the vehicle accelerates well, the
differential is functioning properly.
Information
Usually a locking differential will
operate and release automatically but
occasionally it may not release auto-
matically.
At this time you will feel the tire is
dragged when you are driving or cor-
nering. You can release it manually by
slightly turning the steering wheel
right and left while the vehicle is mov-
ing slowly.
i
•
Never start the engine with
the gearshift lever placed in
the forward or reverse while
one of the rear wheels is
jacked up and the other in
contact with the ground;
doing so may cause the vehi-
cle to jump forward.
•
If one of the rear wheels
begins to spin in mud, snow,
etc., the vehicle can some-
times be driven out by
depressing the accelerator
pedal further; however, avoid
running the engine continu-
ously at high rpm because
doing so could damage the
locking differential.
CAUTION