3
Vacuum cleaner assembling
Always remove the plug from the power supply before fitting or removing accessories.
Fitting flexible hose
Insert the flexible hose into the air inlet and push it until it clicks into proper position.
Hose removing
To remove flexible hose from the vacuum cleaner, push the buttons, then pull the flexible hose to remove it from the attachment point.
Fitting telescopic tube and accessories
Extend the telescopic tube to the desired length by pressing the extension pipe button.
Insert a flexible hose into a telescopic tube.
Fit a nozzle to telescopic tube:
- Floor brush is intended for cleaning bare floor and floor coverings;
- Furniture/crevice nozzle is for cleaning curtain or dust on the decorating surfaces, corners and between cushions
- Sofa brush is for cleaning sofa, curtain or dust on the decorating surfaces.
Instruction for use
Before using the appliance, unwind a sufficient length of cord and insert the plug into the power supply. The yellow mark on the cord shows the ideal
cord length. Do not expand the cord beyond the red mark.
Press the On/Off button to switch the unit on. To stop it press the On/Off button again.
You can adjust the air flow using the air flow regulator on the flexible hose.
You can adjust the vacuum cleaner power using the power control on body.
- decrease power for cleaning curtains, books, furniture, etc.
- increase power for cleaning bare floor.
To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.
Advantages of your vacuum cleaner
Your vacuum cleaner is equipped with 7 step filtration system:
- the constant cloth dust bag;
- the filter, established between the dust bag compartment and the engine of a vacuum cleaner;
- the HEPA filter, established on the air outlet.
The 7-step filtration system reliably keeps the dust inside a vacuum cleaner and provides maximum careful and hygienic tidying up.
