Hyundai H-TV2502PF, Instruction Manual

Page: 11 / 38

11
Operation instructions
WARNING: The main power switch ( 1 of the control location page ) is the manually operated mechanical switch . The remote control can not cut
off power supply to the TV set. For safety purpose, push main switch to the OFF position and make sure the power indicator go out when not use for
long time. Push the power "ON/OFF" switch to the ON position, and then power indicator will light up, the picture(or blue screen) will appear within a
few seconds.
Main menu
1.Press MENU button to select PICTURE .. SOUND .. TIME .. SETUP .. TUNE .. EXCHANGE menu cyclically.
PICTURE
..
SOUND
..
TIME
. .
SETUP
..
TUNE
. .
EXCHANGE
2.After entering into each menu, you can select submenu which you will adjust with PROG.+/- Buttons or (GREEN) /BLUE buttons. Then you can
adjust it with VOL.+/- Buttons or the (RED) / (YELLOW).
Picture menu
1.You can select the CONTRAST.BRIGHTNESS.COLOUR.SHARPNESS.HUE. BLACK STRETCH.TILT.COMB
FILTER item by pressing PROG+/- buttons or (GREEN) / (BLUE) buttons.
2.You can adjust the CONTRAST.BRIGHTNESS.COLOUR.SHARPNESS.HUE.
3.TILT item by press VOL+/- buttons or (RED) / (YELLOW) buttons.
*HUE is displayed only for NTSC system.
*TILT and COMB FILTER item is optional.
*TILT is for GEOMAGNETISM ,You can change the TILT to move
picture to a better position.
*When you set comb-filter ON ,the image quality will be improved sharply.
*Comb-filter cannot be set ON when no colour or in S-VIDEO mode.