Hyundai H-SWE3-100V-UI304, Instruction Manual

Page: 4 / 57

3.
Electrical storage water heater
EN
INTRODUCTION
Before installing and using the appliance, please very carefully read this instruction manual and
manufacturer’s warranty liabilities. Keep the instruction manual for future reference. If you hand
over the appliance to another user, please hand over the instruction manual as well.
For more details or resolution of any occurred problems, please visit Hyundai website at www.
hyundai-hvac.com. You can also contact the nearest regional service center of the manufacturer.
If there are no service centers of the manufacturer in your region, please contact the regional
dealer of Hyundai.
The content of this instruction manual has been checked and approved. The manufacturer is not
responsible for any spelling mistakes in the text and incorrect interpretation of the instruction
manual content.
The appearance, speciications, and package contents of the appliance can be modiied by the
manufacturer without preliminary notiication.
1. GENERAL
Description
Electrical tank water heaters are used for supply of hot water in country houses, cottages, baths,
and other utility spaces, which are not connected to the central hot water supply network. Such
heaters can also be used as standby equipment in apartments for the preventive maintenance
period of the hot water supply network.
The operation principle of the water heater assumes that water pressure in the water heater
meets water pressure in the water main. As water is consumed, the water heater tank is continu-
ously reilled with cold water.
The electrical tank water heater of Amazon series is designed for heating of tap water in
household use. It is capable to prepare a lot of hot water and maintain the set temperature au-
tomatically. The water heater has a steel outer casing. Water is heated in a steel enameled tank
using a copper heating element. Heat insulation made of an environmentally friendly material is
provided between the outer casing and steel tank. The dense insulation layer ensures reduction
of heat loss and signiicant saving of electrical energy.
For mitigation of corrosion efect and provision of consumers with water free from contamina
-
tion, the water heater is equipped with a magnesium anode of extended length. The water heater
has a water heating indicator and a water temperature control knob located on the bottom
cover. The knob controls an integrated thermostat allowing the user to set various water heating
temperatures in the range from +35°C to +75°C. A temperature limiter installed in the appliance
excludes overheating of water above 88°C, while a combined check valve / pressure safety valve
ensures safe operation of the water heater. If pressure inside the tank exceeds 0.75 MPa, the
pressure safety valve will automatically open and exclude rupture of the casing.