11.
EN
Electric air conditioner
portable type
NOTE:
The control is capable of displaying temperature in degrees Fahren-
heit or degrees Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same time, for 3 seconds.
NOTE:
When more than one codes occur the priority of the code display
order is E4--E2--E1--P1.
4. ON-OFF button
Power switch on/off.
5. TIMER button
Used to initiate the AUTO ON start time and AUTO OFF stop time program, in conjuction with the
& buttons.
6. FAN button
Press to select the fan speed in three steps- LOW , HIGH and AUTO. The fan speed indicator light
illuminates under different fan settings except AUTO speed. When select AUTO fan speed, all the
fan indicator lights will turn dark.
7. LED Display
Shows the set temperature in OC “ OF” (“ OF” no display) and the Auto-timer settings.
While on DRY and FAN modes, it shows the room temperature.
Error codes:
E1- Room temperature sensor error. Unplug the unit and plug it back in. If error repeats, call for
service.
E2- Evaporator temperature sensor error- Unplug the unit and plug it back in. If error repeats,
call for service.
E4- Display panel communication error- Unplug the unit and plug it back in. If error repeats, call
for service. Protection codes:
P1- Bottom tray is full - Connect the drain hose and drain the collected water away. If error
repeats, call for service.
8. Power management feature
When the ambi ent tempe rature is lowe r (Coo ling mode ) or higher (Hea ting mode ) than the
setting tempe rature for a period of time, the unit will be automat ically operate power mana
gement feature. The power mana gement indicator light. When the ambi ent tempe rature is
higher (Cooling mode ) or lower (Hea ting mode ) than the setting tempe rature, the unit will be
automat ically quit the power mana gement feature. The power mana gement indicator light he
compressor and fan mot or stop and tillumi nates. turns dark and the compressor and (or) fan
mot or run.
