Hyundai H-MS2302, Instruction Manual

Page: 10 / 36

- 10 -
Compact disc (CD) operations
Inserting and removing discs
Press FUNCTION button on the RC repeatedly until the
display shows “CD” or press CD button on the panel. Press
OPEN/CLOSE button to open the CD-door. Carefully
place a compact disc (CD or MP3) onto the center spindle
with the label side facing outwards. Press OPEN/CLOSE
button to automatically close the CD-door. The CD-display
will show the total number of tracks on the disc after a few
seconds. The CD is now ready for playback. To remove a
disc, press OPEN/CLOSE button. The door will open
upwards allowing the removal of the CD inside.
CD playback
When the CD is in, press PLAY/PAUSE button. The disk will start spinning and the first track will
start playing. The display will indicate the current track number.
During playback, press PLAY/PAUSE button to pause operation of the unit. Press PLAY/PAUSE
button to resume operation at the same track and position.
During playback, press STOP button to stop operation of the set. This will reset the set to the first
track (if you press play after stop, the first track will start playing).
During playback, press NEXT or BACK buttons on the unit or BACK/TUNE DOWN or
NEXT/TUNE UP buttons on the RC to skip forward or backward by one track.
During playback, press and hold NEXT or BACK buttons on the unit or BACK/TUNE DOWN or
NEXT/TUNE UP buttons on the RC to fast-forward or fast-reverse the current track.
Programming the CD-player
The unit can be programmed to play any sequence of up to 64 tracks. Always press STOP button before
starting the programming. Press CLOCK/PROGRAM button on the unit or PROGRAM button on the
RC, the display will show the MEMORY symbol to indicate that the set is now in “memory
programming mode”.
For CD-audio discs:
Press NEXT or BACK buttons on the unit or BACK/TUNE DOWN or NEXT/TUNE UP buttons on
the RC to select the track number you wish to be stored in the current memory (program) position.
Press CLOCK/PROGRAM button on the unit or PROGRAM button on the RC to confirm your
selection.
Repeat the previous 2 steps, each time selecting any track number of your choice to be stored in
successive (program) positions.
After a maximum of 64 or less track have been selected as described above, press
CLOCK/PROGRAM button on the unit or PROGRAM button on the RC, the display will now show
MEMORY to indicate you have saved a program-memory.
Press PLAY/PAUSE button, the unit will playback the saved files in the programmed sequence.
To clear (cancel) the entire program, which is stored in the memory, simply press STOP button, this
will reset the memory and clear the program.
For CD-MP3 data discs:
Press NEXT or BACK buttons on the unit or BACK/TUNE DOWN or NEXT/TUNE UP buttons on
the RC to select the album (folder directory) number, which contains the track you wish to select.
Press CLOCK/PROGRAM button on the unit or PROGRAM button on the RC to confirm.
Press NEXT or BACK buttons on the unit or BACK/TUNE DOWN or NEXT/TUNE UP buttons on
the RC to select the track number you wish to be stored in the current memory (program) position.
Press CLOCK/PROGRAM button on the unit or PROGRAM button on the RC to confirm your
selection.
Repeat the previous 4 steps, each time selecting any album and track number of your choice to be