7
Operation
Button functions
POWER
To switch on the unit, set the power switch
to ON position. When the unit is in operation,
press POWER button on the RC to set the unit
to standby mode. To turn on the unit press
POWER button on the RC (it may take several
seconds until the unit exits standby mode).
The power is not fully turned off in
standby state. If the unit will not be used for a
long time, turn off the power fully by setting the
power switch to OFF position.
GOTO
Press this button to display menus in which
you can input track/chapter/title number or disc
playback time by pressing digit buttons. After
you input the data, playback will start from the
input point.
DVD/SD/USB
Press this button to switch between disc/
USB and memory card mode. Mode selection
is available only if the corresponding storage is
inserted into the unit.
MUTE
Press MUTE button; the sound output will
be muted. Press this button again or adjust
volume to resume the sound.
Number buttons
Press number buttons to input digits and
numbers (e.g. track/chapter number, playback
time etc.).
STEP
When playing DVD, SVCD, VCD disc, press
STEP repeatedly to play video frame by frame.
Press ENTER or button to resume normal
playback.
SUBTITLE
When playing a disc with multi-language
subtitle, press SUBTITLE button continually,
the subtitle languages are changed in a circle,
and you can select the needed one.
ANGLE
When playing the disc with multi-angle,
press ANGLE button to select the view angle.
AUDIO
• When playing DVD with more than one
audio stream, press this button to select the
needed language.
• When playing CD/VCD disc, press this
button to select audio channel (L-mono/R-
mono/mix-mono/stereo).
PBC
When playing a VCD disc, press this button to
turn on or off Playback Control (PBC) function.
TITLE
When playing a DVD disc, press TITLE
button to return to the main title menu of the
disc.
(STOP)
When playing DVD/SVCD/VCD/CD disc,
press this button once, the unit will memorize
the previous ending point; when afterwards you
play the same disc, playback will start from the
memorized point. Press button twice, playback
will stop without memorizing the stop point.
This function is only active when ON is
set for Last Memory item in General setup page.
(PLAY)
When the disc is paused or stopped, press
button to start playback. During playback
press this button to pause playback.
Cursor buttons
Press cursor buttons to navigate in various
menus.
VOL+/VOL-
Press VOL+ button to adjust volume up.
Press VOL- button to adjust volume down.
ENTER
