background image

2

3

Table of contents

Before you start

If you want to dispose this product, do not mix it with general household waste. There is 

a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, 

you will ensure that your disposed product undergoes the necessary treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.

Utilization of the product

Important safeguards

•  Please unplug the power cord from the AC 

outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally.

•  This unit should only be connected to a 

wall socket having grounding.

•  Always disconnect the power cord and 

antenna during a storm.

•  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 

also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time.

•  When unplugging the plug, always hold 

the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord.

•  Please contact the service center 

immediately if you found that the core is 
showed in the air or has been broken.

•  Please replace the AC outlet if the metal 

bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen.

•  Never touch the antenna lie or power plug 

if it stars to thunder.

•  Do not touch the power plug with wet 

hands.

•  Do not use any non-rated power socket 

with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat.

•  All instructions must be read and 

understood well before you operate the unit. 
Heed all warnings and follow all instructions.

•  Please use the accessories provided 

by the manufacturer. Using inadequate 
accessories may result in accidents.

•  Please adjust the product through the 

panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock.

•  Over-press the panel may destroy the 

product.

•  Do not place the product on an unstable 

cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product. 

•  Please place the product on a flat surface 

in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20

0

C ~50

0

C; 

otherwise you may destroy the product. 

Summary of Contents for H-LCD1918




























Reviews: