Hyundai H-HV20-10-UI3324, Instruction Manual & Warranty Card

Page: 9 / 40

9.
Electric convector
EN
WARNING!
The power outlet should be rated at least 10A for models with a maximum
capacity of up to 2000 W and at least 12 A for models with a maximum
capacity of 2500 watt
5. OPERATION
ATTENTION!
In order to increase the operational life of the convector is recom-
mended to note the order unit is switched off. Shutting down the output
without pre-cooling of the heating elements can cause overheating and
premature failure.
For models H-HV20
For model H-HV22
Fig. 6
SMT
1. Thermostat knob
2. Two-key power switch
Turn ON
Connect the convector to the circuit by inserting the plug
of the power cord into the power socket,and set the switch
key to the “I” position.
Selection of the heating mode
Set the switch key to the “I” position to select a low heating
power. Set another switch key to the “I” position to select
the high power heating.
Temperature set
Turn the thermostat knob clockwise until it stops. When the room temperature reach the desired
level, turn the thermostat knob counter-clockwise until the device switches off. Now the thermo -
stat will maintain the set temperature, periodically switching on and off the convector.
Turn OFF
Set the switch key to the “O” position and disconnect the convector from the circuit.
Fig. 5
1
2