IM2021
13
7. INSTALLING THE DEVICE
Installation of the heater is carried out in the following sequence:
- On a vertical flat wall, mark a strictly horizontal line at a height of at least 1.8 meters from the
floor level, and 30 cm from the nearest wall.
- On the established line, draw two marks for the planned holes with a distance between them
equal to 495 cm. Note that when installing the device, its dimensions will be larger than the
distance between the labels. It is recommended to leave a free space within 30 cm or more to
the sides of the marks you have set.
- Drill the holes in the wall strictly according to the marked marks and insert the plastic dowel
provided in the package. Then tighten the mounting screw into the dowel.
- Check the strength of the mounting screws and install the heater on them.
Fig 2*
