Hyundai H-DVD5064, Instruction Manual

Page: 21 / 50

H-DVD5064 ( www.hyundai-electronics.ru ) 21
Press SLOW button to activate slow forward function, continually press the button to select
different speed of playback.
PREVIOUS
When playing DVD disc, press PREVIOUS button to go to the previous chapter.
When playing SVCD, VCD, CD disc, press PREVIOUS button to go to the previous track.
NEXT
When playing DVD disc, press NEXT button to go to the next chapter.
When playing SVCD, VCD, CD disc, press NEXT button to go to the next track.
PROGRAM
If the disc contains 2 or more tracks, chapters or titles, set up the playing order to your preference.
Press PROG button to enter program menu.
Press numeric buttons to input the number of the track, title or chapter. If the programmed tracks
are over ten, press NEXT button to go on programming. Use the cursor buttons to move the
cursor to the START. Press ENTER button to start programmed playback.
Note : For MP3 disc, this function is not available.
SETUP
Press SETUP button to enter or exit DVD player’s setup menu.
V-MODE
Press V-MODE button to switch the video output mode.
A-MODE
Press A-MODE button to switch the audio output mode.
L/R/ST
When playing super VCD, VCD, CD disc with multi-channel, press L/R/ST button to select left
channel/right channel/stereo/mix audio output.
ENTER
Press ENTER button for confirmation of chosen options.
STEP
When playing DVD, SVCD, VCD disc, press STEP button once, the picture changes to next
frame. Press PLAY/PAUSE button to resume normal play.
OSD
Press the OSD button; the relative information of the disc will be displayed on the TV screen.
REPEAT
Press REPEAT button to repeat a title, chapter, track or the whole disc.
When playing DVD disc, press REPEAT button continually, the TV screen shows chapter =>
Title => All => OFF.
When playing SVCD, VCD, CD disc, the turn is following: Track => All => OFF.
When playing MP3 disc, the turn is: Folder => Single => Repeat one => Repeat folder.
A - B
Press A-B button on the start point (A) and the ending point (B) to select the repeat part.