background image

2

Description

2 m                (x 8)                  (x 8)

The set of acoustic system includes:
-  acoustic 

system

-  metal grill   2 pcs
-  speaker wire   2 m
-  screw   8 pcs
-  clip   8 pcs

Important safeguards

 

The owner s manual contains important operating and maintenance instructions for your safety. It is necessary to refer the manual.

 

Do not install the speakers where they may be subjected to excessive heat moisture, dust or where they will be kicked repeatedly, brushed or bumped.

 

Before mounting and connecting the wires be sure that wire of the negative pole terminal is disconnected from accumulator. Nonobservance of this
demand may cause the short circuit or fire.

 

To prevent short circuit never put or leave any metal objects (e.g. coins or metal tools) inside the acoustic system.

 

Make absolutely sure that the terminals for the speakers are connected to the proper outputs from the music source.

 

Never run the wiring on the outside of the vehicle or under it where it can be damaged by road hazards or the moving parts of the vehicle. Use existing
wire channels, sills, panels and molding strips inside the vehicle to hide the wiring for safety and a neat appliance.

 

Make sure the wire of the negative pole terminal is disconnected from accumulator while connecting the speaker terminals. Turn on the various
components and slowly advance the volume. Remember to check and re-check all connections to insure proper installation and use.

Summary of Contents for H-CSA403












Reviews: