10
Operation
power is on. Press PTY/CLK button (in radio
mode - press and hold the button) and then
press and hold the button for 2 seconds, the
time indication will blink on the display. Rotate
VOLUME regulator on the panel or press
VOL+/- buttons on the RC to adjust hours.
Press SEL button to go to minute setting.
Rotate VOLUME regulator on the panel or
press VOL+/- buttons on the RC to adjust
minutes. Press PTY/CLK button on the panel
or CLK button on the RC again or leave the
unit idle for the new setting to take effect.
Press PTY/CLK button on the panel or CLK
button on the RC (in radio mode press and
hold the button) to view the time display.
AUX in jack
AUX-in jack is intended for connecting an
external audio or video equipment to amplify
the sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks using
the car acoustic system.
Radio operations
Band select
Press BND/ID3 button on the panel or
BAND button on the RC repeatedly to select
your desired radio band during Radio mode:
FM1, FM2, FM3, AM1 (MW1), AM2 (MW2).
In each set of the bands you can store up to 6
preset stations, making total 30 preset memory
stations.
Auto/Manual tuning
Press and hold
/
buttons to display
MANU TUNE. Now you can press these
buttons repeatedly to adjust the needed
frequency manually.
To adjust the needed frequency
automatically, press
/
buttons. The radio
regulator on the panel or press VOL+/- buttons
on the RC to adjust the selected parameter.
Balance is to adjust the balance between the
left and right speakers. Fader is to adjust the
balance between the rear and front speakers.
After you have reached your desired effect,
leave the unit idle in order for the new setting
to take effect.
Beep
Press SEL button repeatedly until the display
show BEEP ON; rotate VOLUME regulator on
the panel or press VOL+/- buttons on the RC
to toggle between BEEP ON (beep sound will
be heard when buttons are pressed) and BEEP
OFF, then leave the unit idle for the new setting
to take effect.
EQ modes
Press SEL button repeatedly until the display
show EQ OFF. Rotate VOLUME regulator on
the panel or press VOL+/- buttons on the RC to
choose an equalizer effect: POP => ROCK =>
CLASS => FLAT => EQ OFF. After you have
reached your desired effect, leave the unit idle
in order for the new setting to take effect.
Loudness
Press SEL button repeatedly until the
display shows LOUD ON (LOUD OFF). Rotate
VOLUME regulator on the panel or press
VOL+/- buttons on the RC to select between
LOUD ON/LOUD OFF. LOUD function is to
emphasize the bass output; the word LOUD
ON indicates that the LOUD mode is on.
Color
Press repeatedly SEL button to select
COLOR1 (COLOR2). Rotate VOLUME
regulator on the panel or press VOL+/- buttons
on the RC to select between COLOR1 (red
panel backlight) or COLOR2 (green color
backlight).
Clock setting
The clock can be set anytime when the
