Hyundai H-CDM8035, Instruction Manual

Page: 16 / 50

16
Other parameter setting
To choose the corresponding parameter, press and hold SEL knob for 2 seconds, and then press it repeatedly until the display shows
the parameter. Turn VOL knob or press VOL+/VOL- buttons on the RC to choose the needed value. After choosing, please leave the
unit idle to activate.
TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM the unit does not retune
to TA information.
MASK DPI/MASK ALL
During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK ALL mode,
the unit will mask the AF which has different PI and no RDS signal with high field strength.
RETUNE S/L - SHORT/LONG
“RETUNE” refers to the time period the unit allows for radio scan when reception is interrupted. “S” represents a long time period
and “L” represents a short time period.