Hyundai H-CDM8015, Instruction Manual

Page: 10 / 43

10
General functions
Turning on/off
Press any key on the front panel to turn the unit on. Press POWER button again to turn the unit off.
Mode
Press MODE button to select between AUX, TUNER or S-CDP (disc) modes.
Volume control
The volume level can be adjusted at any time by rotating VOLUME knob.
Bass, treble, balance, fader control
Press VOLUME knob to select bass, treble, balance or fader mode. The corresponding word appears on the display.
Rotate VOLUME knob to adjust the selected parameter. When DSP is on, treble and bass control is not available.
Balance is to adjust the balance between the left and right speakers. Fader is to adjust the balance between the rear
and front speakers.
BEEP ON/OFF mode
Press and hold SEL button for 2 seconds, the display will show DSP OFF. Press SEL button continuously until the
display show BEEP ON; rotate VOL knob to toggle between BEEP ON (beep sound will be heard when buttons
are pressed) and BEEP OFF, then leave the unit idle for your desired setting to take effect.
DSP mode
Press and hold SEL button for 2 seconds, the display will show DSP OFF. Rotate VOL knob to choose an
equalizer effect: POP => ROCK => CLASS => FLAT => DSP OFF. After you have reached your desired effect,
leave the unit idle in order for the new setting to take effect.