Hyundai H-AR9-07H Instruction Manual Download Page 8

Page: 8 / 40

Electric air conditioner (split system)

6. TIMER

With the unit ON, press this button to set OFF timer or with
it OFF to set ON timer. Press this button once, a “ON(OFF)” will flash. Press “ ” or “ ”to
set the number of hours in which the unit will be turned ON/OFF, with an interval of 0.5 hour
if less than 10 hours, or 1 hour if longer than 10 hours , and a range of 0.5-24 hours. Press it
again to confirm the setting, the “ON (OFF)” will stop flashing. If the timer button is not pressed
longer than 10 seconds after the “ON (OFF)” start flashing, the timer setting will be exited.
* If a timer setting is confirmed, pressing this button again will cancel it.

Note: When a ON timer is set, all function buttons (except SLEEP, DISPLAY and iFEEL

can’t be set ) are valid and when the ON time set is up, the unit will operate as preset.

7. This button has two functions.

a. HEALTH

Press this button with the unit ON to activate health related functions, such as negative ion,
electrostatic precipitation, PM2.5 removal, etc, depending on the actual configuration of
each model. Press this button again to deactivate the HEALTH function.
b. iCLEAN
Press this button with the unit OFF, the remote controller will display “CL” and the unit will
automatically clean dust off the evaporator and dry it, to increase the cooling and heating
efficiency. The iCLEAN function runs for approximately 30 minutes, during which if the unit is
turned on with the remote controller or this button is pressed again, the iCLEAN will be deacti-
vated.

8. Режим

или

Each time the “ ” is pressed, the temperature setting will increase by 1℃ and each time

the “ ” is pressed, it will decrease by 1℃.

The temperature setting ranges from 16℃ (60℉)~32℃(90℉).

Note: The temperature cannot be set in AUTO or FAN mode, thus these two buttons are

not functional.

9. TURBO

Press this button only in COOL or HEAT mode to set TURBO on or off to speedy the cooling or
heating. When TURBO is on, the air speed is HIGH. When TURBO is off, the air speed will restore
to previous status.

10. MODE

Press this button, you can select the running mode as follows:
AUTO COOL DRY HEAT FAN

Note: HEAT mode is not available for cool only units.

11. SLEEP

Press this button to enter SLEEP mode, which the unit will exit after 10 hours of continuous
operation and restore to the previous status.

Note:The SLEEP function cannot be activated in FAN mode.

12. SWING

Press this button to activate up/down swing and press it again to fix the swing position.

13. SWING

Press this button to activate left/right swing and press it again
to fix the swing position.

14, 15.

In this model, the functions are not provided

7. OPERATING MODES

Automatic operation mode

1. Press the “MODE” button, select the automatic operation mode.
2. By pressing the “SPEED” button, you can select the fan speed from LOW, MID, HIGH, AUTO.
3. Press the “ON/OFF” button, the air-conditioner starts to operate.
4. Press the “ON/OFF” button again, the air-conditioner stops.

Note: In the fan operation mode, the temperature settings is non-effective.

SET

ON/OFF

FEAN
HIGH

MID

LOW

AUTO
COOL
DRY
HEAT

SET TEMPERATURE (°C)

MODE

TURBO

DISPLAY

iFEEL