Hyundai H-AR7-07H-UI134/I, Instruction Manual & Warranty Card

Page: 13 / 68

13.
Electric air conditioner (split system)
EN
To set the Auto-on time .
1. Press the TIMER ON button. The remote con
-
troller shows TIMER ON, the last Auto-on setting
time and the signal “H” will be shown on the LCD
display area. Now it is ready to reset the Auto-on
time to START the operation.
2. Push the TIMER ON button again to set de
-
sired Auto-on time. Each time you press the but
-
ton, the time increases by half an hour between
0 and 10 hours and by one hour between 10 and
24 hours.
3. Ater setting the TIMER ON ,there will be a one
second delay before the remote controller trans
-
mits the signal to the air conditioner. Then, ater
approximately another 2 seconds, the signal
“h” will disappear and the set temperature will
re-appear on the LCD display window.
TIMER OPERATION
Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can
set the auto-of time of the unit.
To set the Auto-of time.
Press the TIMER OFF button. The remote controller shows TIMER OFF, the last Auto-of setting
time and the signal “H” will be shown on the LCD display area. Now it is ready to reset the Au
-
to-of time to stop the operation.
2. Push the TIMER OFF button again to set desired Auto-of time. Each time you press the button,
the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24
hours.
3. Ater setting the TIMER OFF ,there will be a one second delay before the remote controller
transmits the signal to the air conditioner. Then, ater approximately another 2 seconds, the
signal “H “ will disappear and the set temperature will re-appear on the LCD display window.
NOTE:
In the Dehumidifying mode, you can not switch the fan speed. It has
already been automatically controlled.
Fig. 7
1
2
speed
temp
mode
memory
timer on
swing direct ion sleep
timer off
clean maxi climate control