Hyundai H-AR18-07H/I, Instruction Manual & Warranty Card

Page: 10 / 40

10
Electric air conditioner (split system)
EN
Drying operation mode
1. Press the «MODE» button, select the drying operation mode.
2. Press the «ON/OFF» button, the air-conditioner starts to operate.
3. Press the «ON/OFF» button again, the air-conditioner stops.
Backlight function (for remote controllers with such function only)
The remote controller has a backlight which can be turned on by pressing
any button for the convenience of operation in darkness. The backlight will be
automatically turned off if there is no operation within 10 seconds.
8. MAINTENANCE
Before cleaning unplug the conditioner.
Cleaning of the indoor unit and remote control board:
• Indoor unit and remote control board should be cleaned with a dry soſt cloth.
• If the indoor unit is too unclean, moisten the cloth with cold water.
• In order to avoid the damage of paint or details of the conditioner, do not
clean it with brushes and do not leave them on the surface of indoor unit.
• In order to avoid the damage of surface or deformation of the conditioner
details, do not clean it with petrol, solvents, cleaning powders or other
chemically active substances.
Before a sustained interruption in the conditioner work:
• Turn the conditioner on for several hours in the FAN mode. It will allow you
to dry its inner cavities.
• Unplug the conditioner.
• Remove the batteries from the remote control board.
Cheks before starting:
• Make sure that an air fi lter is installed.
• Make sure that air inlet and outlet grilles of the outdoor unit are not
blocked by foreign objects.
Cleaning of air fi lter.
• Air fi lter cleans the air entering the conditioner from dust and foreign particles.
If the fi lter is contaminated, the conditioner capacity decreases sharply.
• If the conditioner is operated permanently, the fi lter should be cleaned
once per two weeks.
• If the conditioner is installed in a room with dusty atmosphere, then the air
fi lter should be cleaned more oſt en.
• To remove the fi lter, open the indoor unit panel.
• Remove air fi lters. Clean the fi lter with a vacuum cleaner or rinse it in clean
water. If the fi lter is contaminated heavily, clean it with a soſt brush and
wash in diluted washing solution, then dry it in a cool place.