Hyundai H-AR1-05C-UI009/I, Instruction Manual

Page: 10 / 52

10.
Electric air conditioner (split system)
EN
REMOTE CONTROL
Fig. 3
Рис. 4
a b c d
а) Defrosting-Preheating indicator
b) Power indicator
c) Temperature indicator
d) Timer indicator
* use of particular indicators depends on
model and series.
** design of indicator symbols may differ
depending on model and series.
Indication of the control board display
shall correspond to selected modes.
1. Button “ON/OFF”. Using this button, you
may turn the conditioner on or off.
2. Button “TEMP” (decrease) for setting of the
required air temperature from 17°С to 30°С.
Using this button, you may set the required
air temperature indoors.
3. Button «MEMORy ». Using this button
you may restore the current settings or
resume previous setting.
4. Select-mode button “MODE”. Using this
button, you may select a required mode:
Auto, Cool, Dry, Heat, Fan.
5. Button “SLEEP”. Using this button, you may
turn the sleep mode on and off. In this mode
the fan speed will be low.
6. Button “SWING”. Using this button, you may
regulate position of air-relief blinds and
forward treated air to various directions.
7. Button “LED”. Using this button you can may
to clear the display on the indoor unit. Press
it again to light the display.
8. Button «TIMER OFF». This button sets the
automatic switch-off (set the desired time by
pressing the “TEMP” up-down or as a button
“TIMER OFF”). The device automatically
turns off after a selected period of time.
9. Button «TIMER ON». This button sets the
automatic switch-on (set the desired time by
pressing the “TEMP” up-down or as a button
“TIMER ON”). The device automatically turns
on after a selected period of time.
10. Button «SPEED». Using this button, you may
select rotation speed of the indoor unit fan:
«Auto», «High», «Middle», «Low».
11. Button “TEMP” (increase) for setting of the
required air temperature from 17°С to 30°С.
Using this button, you may set the required
air temperature indoors.
12. Button «CLIMATE CONTROL» (HD Sensor
control). With this button you can select the
mode HD Sensor control.
13. Button “CLEAN“. Using this button you cat
turon On/Off the function drying of the
evoparator of indoor unit. It prevents mold
formation on the heat exchanger. After
deactivation of the cooling function, the air
conditioner is switched to the fan mode,
then to the heating mode, again to the fan
mode, and switched off in order to dry the
heat exchanger of the internal module and
prevent mold formation on it.
11
10
9
8
15
2
4
6
5
12
13
3
1
7
14