Hyundai H-AP1-03C-UI001, Instruction Manual

Page: 13 / 52

13.
EN
Electric air conditioner
portable type
10. TROUBLESHOOTING
The air conditioner is not
switched on when Power
button is pressed
Loud noise or strong vibra -
tion
A noise, resembling a gurgle
of water
The tank fill-up indicator
is flashing, the condensate
collection tray is filled up
The air conditioner is
installed on an inclined or
unsmooth surface
Noise emerges due to
refrigerant flow in pipes
Drain water from the tray
Install the air conditioner on a
smooth horizontal surface
It is normal
Trouble Cause Troubleshooting method
E1
E2
E4
Electrical short on both
temperature sensor and
PCB
Electrical short of tempera -
ture sensor copper tube and
PCB wiring
Indicates water tank full or
possibly the incorrect wiring
of plug
Contact an electrician for
repair
Contact an electrician for
repair
User needs to pull out the
rubber stopper which is
located at the bottom of the
unit, to drain the water away.
Check that the plug has been
wired correctly.
Error codes for LED-display model
NOTE:
When more than one codes occur, the priority of the code display
order is: E4--E2--E1--P1.
Such marking indicates that disposal of this product along with other
domestic waste is forbidden in the EU. To prevent environmental or
health damage as a result of uncontrolled waste disposal, please hand
this product for recycling to enable rational use of material resources.
To return the device you used, please use the collection and return
system or contact the point of sale, where the device was purchased.
They can take it for an environmentally safe disposal.