![background image](http://html1.mh-extra.com/html/hyundai/h-alc3-18h-i/h-alc3-18h-i_instruction-manual-and-warranty-card_2195039007.webp)
7.
Electric air conditioner. Split system
EN
5. DELIVERY SET
Complete set of air conditioner (split system) includes:
Conditioner unit for indoor installation - 1 piece
Conditioner unit for outdoor installation - 1 piece
Remote control - 1 piece
Batteries for remote control board - 2 pcs.
Operator’s manual with warranty card -1 piece
Packing of indoor-installation unit - 1 piece
Packing of outdoor-installation unit - 1 piece
6. DEVICE CONTROL
The conditioner is controlled from a remote control board or from a control panel of the indoor
unit.
Control and indication board of your conditioner may visually differ from a layout view shown
below. Its functions will remain the same.
12. Operation indicator
13. Timer indicator
14. Defrosting-Preheating indicator
15. Indicator alarm status
16. Set button. Using this button you may select operation
17. LED display. Indicator of temperature
Emergency control shall be used if the remote control board is lost or broken, or batteries are
low. Using an emergency control button situated on the indoor unit control panel you may select
COOL or AUTO mode of the conditioner work. Pressing this button, select a mode of the condi-
tioner work: AUTO, COOL, the conditioner is OFF, AUTO again, etc.
1. Auto mode. The operation indicator lights up and the air conditioner works in the forced auto-
matic mode. The remote controller can be used.
2. Forced cooling. The operation indicator blinks and the air conditioner works in the forced cool-
Fig. 2. Description of indoor unit control board
RUN
DEFROST
TIMER
FAULT
Operation
indicator
Temperature
Indicator
defrosting/pre-
heat light
Warning light
Timing Light
On./Off.
Infrared
signal
receiver