4
Instruction manual
General operations
Turning the unit on & off
• Make sure the battery is charged and
press and hold the STANDBY button to turn
the unit on. Press and hold the button again to
turn the unit off.
Clock
• By default, you enter the clock mode. In
clock mode press and hold the CLOCK button
to enable time setting mode. Press repeatedly
button to go to setting of parameters in
following sequence: year => month => day =>
hour => minute. The selected parameter will
blink meaning readiness for adjustment.
• Rotate the VOLUME knob clockwise
to adjust the parameter up. Rotate it
counterclockwise to adjust the parameter
down.
• Day of week will be set automatically.
• In time setting mode, if no button is pressed
within 5 seconds after a parameter is selected,
the unit will automatically go to clock mode.
• In any mode press CLOCK to view the
current date and time.
AUX input
To connect an external audio device (e.g.
MP3-player), please use a standard stereo
cable with 3.5 mm to 3.5 mm plugs to connect
the audio line-out of the external device to the
AUX input socket of this unit.
Radio operation
• In clock mode press button to switch
the radio on.
If USB, SD or microSD memory cards
are inserted in the unit, press the MODE button
to access the radio mode.
• To adjust the frequency step by step press
the VOLUME knob and rotate it clockwise or
counterclockwise. For automatic search of a
station, press and hold
or
button; the
unit will look for the next available station and
start its broadcast. Repeat the operation to
search more stations.
• Alternatively, press and hold button to
start the automatic search of radio stations.
Each found station will be saved as a preset
for a maximum of 40 presets. In radio mode.
press
or
button to switch between saved
stations.
• Extend the antenna for a better signal
reception.
• To adjust volume, in radio mode turn the
VOLUME knob (press it once if it’s in radio fine
tune mode).
• To switch off the radio, press or MODE
button.
USB/SD/MMC operation
Connecting USB/SD/microSD
• Insert a USB device into the USB port
or insert a memory card into the memory
card slot. Press button to enable USB/SD/
microSD mode. The unit will start reading the
device. Press MODE button to select among
USB, SD/MMC and microSD mode, if several
storage devices are inserted (USB is played by
default).
At one time, either SD/MMC or microSD/
TF card can be inserted simultaneosly.
Playback operations
• During playback press button to pause
playback. Press this button again to resume
playback.
• During playback press
or
buttons to
go to previous or next track. Press and hold the
or
buttons to scan the currently playing
track.
• To adjust volume, turn the VOLUME
regulator.
• In playback mode, press MODE button to
switch off the player and go to radio mode.
General USB/SD/microSD notes
• This unit is equipped with a USB socket
