5
Instruction manual
MMC card socket that can accept and play
MP3 files stored on standard SD/MMC cards
up to 32GB.
Always switch off the unit or change
mode to another one before removing a
USB flash drive or SD/MMC card, to prevent
damage to your USB device or memory card.
Note:
Although this product is fully
compatible with USB 2.0 and SD/MMC card
standard formats, a small percentage of USB
flash drives and SD/MMC cards might not be
readable, due to those device manufacturers’
non-compliance with the full (official) USB and
SD/MMC card standards.
• FAT32 file system is supported by USB
and SD/MMC of this unit.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warranty cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
Bluetooth
• Press the M button until the “BLUE” will
appear on the screen along with a chime
indicating the readiness for bluetooth pairing.
• Access the bluetooth interface on your
phone or other device. The receiver will be
shown as H-1634UB.
• You can now start playing music on your
device and it will be transmitted to the receiver.
Press the button to pause/resume playback.
Press the
or
buttons to choose the
previous or the next track.
• Press the EQ button on the remote control
to switch between equalizer modes: Natural,
rock, pop, classic, soft, jazz, bass, blues, hall.
• Press the REPEAT button on the RC
repeat all tracks, one track, or a random track.
• Press the LIGHT button or press and
hold the M button on the unit to switch the
decorative lights on and off.
Maintenance and care
If necessary, clean the unit with a piece of
cloth dampened with water only (be sure the
power cord is disconnected). The unit should
not be exposed to dripping or splashing and no
objects filled with liquids, should be placed on
the unit. Normal ventilation of the unit must not
be impeded for intended use.
Remote control operation
